Mac Pro Xeon Mid 2010 dreht Däumchen...

[Pepper14]

<div class="bbWrapper">Hallo,<br /> <br /> Mein MacPro Quad Core Xeon Mid 2010 hat seit geraumer Zeit das Problem, daß er immer wieder kurze Pausen einlegt: -Entweder beim Zugriff auf eine der vier eingebauten Festplatten, z.B. beim Abspeichern einer Datei dreht er das farbige Bällchen bis zu 30 Sekunden, bevor er dann ordnungsgemäß die Dateiverwaltung öffnet, oder wenn ich z.B. in Lightroom einen Slider betätigen möchte hakt dieser kurz, bevor er sich bewegen lässt. <br /> <br /> Ich habe bereits das System komplett neu aufgespielt, inkl. Programme, auf Yosemite aktualisiert (hat das Problem eher verschlimmert) und vieles mehr, aber es das hat alles nichts gebracht. Was tun?</div>

 

[mafri]

<div class="bbWrapper">Wirf mal einen Blick hier rein:<br /> <a href="http://www.apfeltalk.de/community/threads/warnung-vor-cleanup-tools-antivirenprogrammen-co.435167/" target="_blank" class="link link--external" rel="nofollow ugc noopener">http://www.apfeltalk.de/community/threads/warnung-vor-cleanup-tools-antivirenprogrammen-co.435167/</a><br /> <br /> Gegebenenfalls auch noch hier:<br /> <a href="http://www.apfeltalk.de/community/threads/bewertung-von-etrecheck-logs-durch-profis.464950/" target="_blank" class="link link--external" rel="nofollow ugc noopener">http://www.apfeltalk.de/community/threads/bewertung-von-etrecheck-logs-durch-profis.464950/</a><br /> und<br /> <a href="http://www.apfeltalk.de/community/threads/tutorial-richtiges-posten-von-konsoleneintraegen-und-etrecheck-logs.428442/" target="_blank" class="link link--external" rel="nofollow ugc noopener">http://www.apfeltalk.de/community/t...konsoleneintraegen-und-etrecheck-logs.428442/</a><br /> <br /> Ich hoffe damit kommst Du weiter...</div>

 

[Pepper14]

<div class="bbWrapper">OK, erstmal vielen Dank für die schnelle Antwort, von den genannten Programmen habe ich nix installiert, anbei mein etrecheck:<br /> <br /> <div class="bbCodeBlock bbCodeBlock--screenLimited bbCodeBlock--code"> <div class="bbCodeBlock-title"> Code: </div> <div class="bbCodeBlock-content" dir="ltr"> <pre class="bbCodeCode" dir="ltr" data-xf-init="code-block" data-lang=""><code>EtreCheck version: 2.6.3 (223) Report generated 16.11.15 16:13 Runtime 1:36 Download EtreCheck from http://etresoft.com/etrecheck Click the [Click for support] links for help with non-Apple products. Click the [Click for details] links for more information about that line. Hardware Information: (What does this mean?) Mac Pro (Mid 2010) [Click for Technical Specifications] [Click for User Guide] Mac Pro - model: MacPro5,1 1 2.8 GHz Quad-Core Intel Xeon CPU: 4-core 32 GB RAM Upgradeable [Click for upgrade instructions] DIMM 1 8 GB DDR3 ECC 1066 MHz ok DIMM 2 8 GB DDR3 ECC 1066 MHz ok DIMM 3 8 GB DDR3 ECC 1066 MHz ok DIMM 4 8 GB DDR3 ECC 1066 MHz ok Bluetooth: Old - Handoff/Airdrop2 not supported Wireless: en2: 802.11 a/b/g/n Video Information: (What does this mean?) ATI Radeon HD 5770 - VRAM: 1024 MB LCD2070NX 1600 x 1200 @ 60 Hz LCD2070NX 1600 x 1200 @ 60 Hz System Software: (What does this mean?) OS X Yosemite 10.10.5 (14F27) - Time since boot: about 3 hours Disk Information: (What does this mean?) HL-DT-ST DVDRAM GH24NSC0 () HL-DT-ST DVD-RW GH41N () Samsung SSD 850 EVO 500GB disk0 : (500,11 GB) (Solid State - TRIM: No) EFI (disk0s1) &lt;not mounted&gt; : 210 MB System (disk0s2) / : 499.25 GB (245.77 GB free) Recovery HD (disk0s3) &lt;not mounted&gt; [Recovery]: 650 MB MKNSSDCR480GB disk1 : (480,1 GB) (Solid State - TRIM: No) EFI (disk1s1) &lt;not mounted&gt; : 210 MB raw3 (disk1s2) /Volumes/raw3 : 479.76 GB (121.68 GB free) WDC WD1002FAEX-00Z3A0 disk2 : (1 TB) (Rotational) EFI (disk2s1) &lt;not mounted&gt; : 210 MB Bilder2 (disk2s2) /Volumes/Bilder2 : 999.86 GB (222.94 GB free) ST2000DM001-1ER164 disk3 : (2 TB) (Rotational) EFI (disk3s1) &lt;not mounted&gt; : 210 MB RAW2 (disk3s2) /Volumes/RAW2 : 2.00 TB (1.01 TB free) USB Information: (What does this mean?) Apple, Inc. Keyboard Hub Apple, Inc Apple Keyboard Logitech USB Receiver Apple Inc. BRCM2046 Hub Apple Inc. Bluetooth USB Host Controller Gatekeeper: (What does this mean?) Mac App Store and identified developers Kernel Extensions: (What does this mean?) /Applications/Capture One.app [not loaded] com.Leaf.driver.LeafFwXDriverMatcher (1.2.0d1) [Click for support] /Applications/Parallels Access.app [loaded] com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support] /Applications/Parallels Desktop.app [not loaded] com.parallels.kext.hypervisor (10.1.4 28883 - SDK 10.7) [Click for support] [not loaded] com.parallels.kext.netbridge (10.1.4 28883 - SDK 10.7) [Click for support] [not loaded] com.parallels.kext.usbconnect (10.1.4 28883 - SDK 10.7) [Click for support] [not loaded] com.parallels.kext.vnic (10.1.4 28883 - SDK 10.7) [Click for support] /Library/Extensions [not loaded] com.Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8) [Click for support] [loaded] com.driver.LogJoystick (2.0 - SDK 10.8) [Click for support] [loaded] com.logitech.driver.LogiGamingMouseFilter (1 - SDK 10.8) [Click for support] /System/Library/Extensions [not loaded] com.Logitech.Unifying.HID Driver (1.3.0 - SDK 10.6) [Click for support] Launch Agents: (What does this mean?) [running] com.Logitech.Control Center.Daemon.plist [Click for support] [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support] [loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support] [loaded] com.teamviewer.teamviewer.plist [Click for support] [loaded] com.teamviewer.teamviewer_desktop.plist [Click for support] Launch Daemons: (What does this mean?) [loaded] com.adobe.SwitchBoard.plist [Click for support] [loaded] com.adobe.agsservice.plist [Click for support] [loaded] com.adobe.fpsaud.plist [Click for support] [running] com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support] [loaded] com.parallels.mobile.kextloader.launchdaemon.plist [Click for support] [loaded] com.teamviewer.Helper.plist [Click for support] [loaded] com.teamviewer.teamviewer_service.plist [Click for support] [running] com.tobit.rfx-server.plist [Click for support] User Launch Agents: (What does this mean?) [loaded] com.adobe.AAM.Updater-1.0.plist [Click for support] [running] com.parallels.mobile.startgui.launchagent.plist [Click for support] User Login Items: (What does this mean?) NeoFinder Global QuickFind UNKNOWN (missing value) iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app) AdobeResourceSynchronizer Programm (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app) Logitech Gaming Software Programm Hidden (/Applications/Logitech/Logitech Gaming Software.app) Other Apps: (What does this mean?) [running] com.adobe.Lightroom6.151972 [running] com.adobe.Photoshop.21616 [running] com.adobe.bridge5.17356 [running] com.adobe.switchboard-2.0.112496 [running] com.apple.reminders.7984 - Invalid signature! [running] com.apple.xpc.launchd.oneshot.0x10000006.EtreCheck [running] com.filemaker.client.pro.26160 [running] com.logitech.gaming.260176 [running] de.med-i-bit.MacGiroMemo Internet Plug-ins: (What does this mean?) AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support] FlashPlayer-10.6: Version: 19.0.0.245 - SDK 10.6 [Click for support] AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support] Flash Player: Version: 19.0.0.245 - SDK 10.6 [Click for support] AdobePDFViewer: Version: 8.0.0 [Click for support] Default Browser: Version: 600 - SDK 10.10 QuickTime Plugin: Version: 7.7.3 JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version Safari Extensions: (What does this mean?) AdBlock DuckDuckGo ExifExt TinEye Open in Internet Explorer 3rd Party Preference Panes: (What does this mean?) Flash Player [Click for support] Logitech Control Center [Click for support] Time Machine: (What does this mean?) Auto backup: YES Volumes being backed up: System: Disk size: 499.25 GB Disk used: 253.48 GB Destinations: Backup_Nick_4TB [Local] Total size: 4.00 TB Total number of backups: 17 Oldest backup: 09.09.15 21:50 Last backup: 04.11.15 18:41 Size of backup disk: Excellent Backup size 4.00 TB &gt; (Disk size 499.25 GB X 3) Top Processes by CPU: (What does this mean?) 4% WindowServer 2% fontd 1% Adobe Lightroom 0% AdobeCrashDaemon(3) 0% askpermissiond Top Processes by Memory: (What does this mean?) 2.27 GB Adobe Lightroom 1.46 GB kernel_task 459 MB softwareupdated 328 MB com.apple.WebKit.WebContent 328 MB Safari Virtual Memory Information: (What does this mean?) 23.00 GB Free RAM 9.21 GB Used RAM (2.64 GB Cached) 0 B Swap Used Diagnostics Information: (What does this mean?) Nov 16, 2015, 01:03:31 PM /Library/Logs/DiagnosticReports/mdworker_2015-11-16-130331_[redacted].cpu_resource.diag [Click for details] Nov 16, 2015, 12:59:32 PM /Library/Logs/DiagnosticReports/Adobe Lightroom_2015-11-16-125932_[redacted].cpu_resource.diag [Click for details] Nov 16, 2015, 12:57:04 PM Self test - passed</code></pre> </div> </div><br /> <br /> Kann man daraus was schliessen?</div>

 

[doc_holleday]

<div class="bbWrapper">Ich sehe da auf den ersten Blick jetzt nichts besonderes, daher wäre mein Vorschlag mal die Hardware zu prüfen. Zum einen mit dem Apple Hardware Test (schnelle und ausführliche Variante) und dann zusätzlich noch mal gezielt den RAM.</div>

 

[Wuchtbrumme]

<div class="bbWrapper">wenn Du den SMARTReporter Tryout auf disk2 und 3 loslässt, was sagt der Raw-Value des Attributs Load-/Unload Cycle Count?</div>

 

[Marcel Bresink]

<div class="bbWrapper"><blockquote data-attributes="member: 208978" data-quote="Pepper14" data-source="post: 4766275" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/community/goto/post?id=4766275" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-4766275">Pepper14 schrieb:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> z.B. beim Abspeichern einer Datei dreht er das farbige Bällchen bis zu 30 Sekunden, bevor er dann ordnungsgemäß die Dateiverwaltung öffnet </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Zum Vergrößern anklicken....</a></div> </div> </blockquote><br /> Das ist normal, wenn alle Festplatten schlafen. Wenn das sehr lange dauert, hat aber eine möglicherweise zusätzliche Startprobleme. Ändert sich die Situation, wenn die Energiesparoption &quot;Wenn möglich, Ruhezustand für Festplatten aktivieren&quot; ausgeschaltet wird?</div>

 

[Pepper14]

<div class="bbWrapper"><blockquote data-attributes="member: 112770" data-quote="Wuchtbrumme" data-source="post: 4766528" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/community/goto/post?id=4766528" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-4766528">Wuchtbrumme schrieb:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> wenn Du den SMARTReporter Tryout auf disk2 und 3 loslässt, was sagt der Raw-Value des Attributs Load-/Unload Cycle Count? </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Zum Vergrößern anklicken....</a></div> </div> </blockquote><br /> das sind die Ergebnisse für disk 2:<br /> <br /> <div class="bbCodeBlock bbCodeBlock--screenLimited bbCodeBlock--code"> <div class="bbCodeBlock-title"> Code: </div> <div class="bbCodeBlock-content" dir="ltr"> <pre class="bbCodeCode" dir="ltr" data-xf-init="code-block" data-lang=""><code>/Users/Hempel/Downloads/SMARTReporter.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk2 smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: MKNSSDCR480GB Serial Number: MKN1216A0000078488 LU WWN Device Id: 0 000120 000000000 Firmware Version: 502ABBF0 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Nov 18 18:05:43 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0/0 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 4 9 Power_On_Hours_and_Msec 0x0032 000 000 000 Old_age Always - 9007h+08m+21.950s 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1194 171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2 172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 41 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 2 181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 2 182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0000 029 045 000 Old_age Offline - 29 (Min/Max 12/45) 194 Temperature_Celsius 0x0022 029 045 000 Old_age Always - 29 (Min/Max 12/45) 195 ECC_Uncorr_Error_Count 0x001c 100 100 000 Old_age Offline - 0/0 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 4 201 Unc_Soft_Read_Err_Rate 0x001c 100 100 000 Old_age Offline - 0/0 204 Soft_ECC_Correct_Rate 0x001c 100 100 000 Old_age Offline - 0/0 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0 233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 13750 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 7761 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 7761 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 14692 SMART Error Log Version: 0 No Errors Logged SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.</code></pre> </div> </div><br /> und zu disk 3:<br /> <div class="bbCodeBlock bbCodeBlock--screenLimited bbCodeBlock--code"> <div class="bbCodeBlock-title"> Code: </div> <div class="bbCodeBlock-content" dir="ltr"> <pre class="bbCodeCode" dir="ltr" data-xf-init="code-block" data-lang=""><code>/Users/Hempel/Downloads/SMARTReporter.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk3 smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST2000DM001-1ER164 Serial Number: Z4Z3DPEJ LU WWN Device Id: 5 000c50 086d167a9 Firmware Version: CC25 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Nov 18 18:06:58 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 80) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 212) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 229466976 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 59 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 511890 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 442 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 55 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 068 062 045 Old_age Always - 32 (Min/Max 17/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 929 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 14 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 60h+30m+12.085s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2111827595 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 12971995042 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.</code></pre> </div> </div><br /> Der Apple Hardwaretest kann auch nichts finden...<br /> und der Ruhezustand ist ausgeschaltet.<br /> <br /> Danke für die Antworten!</div>

 

[Wuchtbrumme]

<div class="bbWrapper">bei den beiden Geräten sieht überhaupt nix verdächtig aus, alles super. Allerdings sind die Gerätenamen vertauscht; laut EtreCheck hätte ich die SMART-Attribute von WD und Seagate-elektromechanischen Festplatten erwartet (und diesen Typ wegen der mit Hochfahren bzw. Parkposition verbundenen Wartezeit am ehesten verdächtigt). Würdest Du von der ersten SSD und der WD noch bitte nachliefern? <br /> <br /> Ansonsten fällt mir noch ein, einfach mal einen anderen Benutzer anzulegen und direkt in diesen hineinzubooten - um zu gucken, ob das Haken dort auch vorhanden ist. Berüchtigt sind da z.B. einige Versionen von DefaultFolderX, aber davon sehe ich nichts. Auch andere Programme, die sich iwie einklinken, könnten solche Verzögerungen provozieren.</div>

 

[Pepper14]

<div class="bbWrapper">Ok, das ist ja schon mal ein Tipp, probiere ich heute Abend aus. <br /> <br /> Hier noch die beiden Berichte: disk 1:<br /> <div class="bbCodeBlock bbCodeBlock--screenLimited bbCodeBlock--code"> <div class="bbCodeBlock-title"> Code: </div> <div class="bbCodeBlock-content" dir="ltr"> <pre class="bbCodeCode" dir="ltr" data-xf-init="code-block" data-lang=""><code>/Users/Hempel/Downloads/SMARTReporter.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk0 smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 EVO 500GB Serial Number: S21JNSAG169775Y LU WWN Device Id: 5 002538 da0162957 Firmware Version: EMT01B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Nov 19 08:24:26 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1687 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 198 177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 19 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 183 Runtime_Bad_Block 0x0013 100 099 010 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 079 057 000 Old_age Always - 21 195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 77 235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 7 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 8590733021 SMART Error Log Version: 1 No Errors Logged Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1687 - # 2 Short offline Completed without error 00% 1686 - # 3 Short offline Completed without error 00% 1685 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.</code></pre> </div> </div><br /> und disk 4<br /> <div class="bbCodeBlock bbCodeBlock--screenLimited bbCodeBlock--code"> <div class="bbCodeBlock-title"> Code: </div> <div class="bbCodeBlock-content" dir="ltr"> <pre class="bbCodeCode" dir="ltr" data-xf-init="code-block" data-lang=""><code>/Users/Hempel/Downloads/SMARTReporter.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk2 smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD1002FAEX-00Z3A0 Serial Number: WD-WCATR5832705 LU WWN Device Id: 5 0014ee 2b0321ac7 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 6.0 Gb/s Local Time is: Thu Nov 19 08:26:40 2015 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (17700) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 204) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 182 169 021 Pre-fail Always - 3866 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1769 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 12632 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1738 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 87 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1681 194 Temperature_Celsius 0x0022 121 105 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12630 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.</code></pre> </div> </div><br /> Melde mich wieder mit dem Ergebniss des &quot;neuen Benutzers&quot;...</div>

 

[Wuchtbrumme]

<div class="bbWrapper">sieht auch nicht per se verdächtig aus. Kein nicht korrekt arbeitendes Powermanagement - sondern verhält sich i.O.<br /> Die EVO-SSD hat irgendein Problem mit dem SATA-Interface, könnte auf ein defektes Kabel hindeuten (Ultra DMA CRC Error Count=77). Da die Werte nicht zurückgesetzt werden wäre es auch möglich, dass wenn Du die SSD mal an einem externen Gehäuse oder an einem anderen Rechner betrieben hast, dort das Kabel nicht ok war. Ich würde es mal im Auge behalten. Wenn es sich erhöht, könnte es was mit Deinem Problem zu tun haben (Fehler auf dem Interface könnten durch Drosselung der Geschwindigkeit kompensiert werden, dazu handeln der Hostbusadapter und der Controller auf der SSD diese neu aus). Genau dasselbe könnte bei Firmwarefehlern passieren, weil z.B. die SSD versucht, mit 6Gbps zu verbinden, was wohl Dein HBA nicht kann. Ist aber alles Spekulation.</div>